Teknik Özellikler
| Range of product | Telemecanique Inductive proximity sensors XS |
|---|---|
| Series name | General purpose |
| Sensor type | Inductive proximity sensor |
| Product specific application | Not applicable |
| Sensor name | XS8 |
| Sensor design | Cubic form 40 x 40 x 40 |
| Size | 40 mm |
| Body type | Fixed |
| Detector flush mounting acceptance | Non flush mountable |
| Material | Plastic |
| Type of output signal | Discrete |
| Wiring technique | 4-wire |
| Output circuit type | DC |
| Discrete output function | 1 NO + 1 NC |
| Discrete output type | NPN |
| Electrical connection | Cable |
| Switching capacity in mA | <= 200 mA with overload and short-circuit protection |
| [Us] rated supply voltage | 12...48 V DC with reverse polarity protection |
| IP degree of protection | IP67 conforming to IEC 60529 |
| Enclosure material | Plastic |
| Front material | Plastic |
| Sensing range | > 15...40 mm |
| Differential travel | 3...20% of Sr |
| Repeat accuracy | <= 3% of Sr |
| Cable composition | 4 x 0.08 mm² |
| Wire insulation material | PVC |
| Status LED | Output state: 1 LED (yellow) |
| Residual current | 0.1 mA open state |
| Switching frequency | <= 1000 Hz |
| Voltage drop | <2 V (closed) |
| Current consumption | 0...10 mA no-load |
| Delay first up | 7 MILLISECOND |
| Delay response | 0.3 MILLISECOND |
| Delay recovery | 0.7 MILLISECOND |
| Marking | CE |
| Product certifications | CCCCSAUL |
| Unit type of package 1 | PCE |
| Number of units in package 1 | 1 |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. Fo more information go to www.P65Warnings.ca.gov |